ALLIGATOR BEET DE-STONER
Tonnes / Hour
60 (De-stoning & chopping)
THE CROSS ALLIGATOR BEET DE-STONER
Much like the Rhino Beet Washer without the wash tumbler, the Cross Alligator Beet De-Stoner is equipped to de-stone & chop beet. This De-Stoner also has a pre-cleaning feature which helps the water last longer per cycle. The Alligator has the ability to remove 100% of the stones in the beet crop. This allows users to have a stone free sample if they are less worried about dirt. The water in the Alligator can last a lot longer than most of the beet washing range due to the water cleaning system as the machine works. Drive options include Engine, PTO & Electric. The Alligator can be equipped with a Jet was system to allow the user to Jet wash the crop as it tumbles up the elevator. This takes place after a brief soak in water.
Before & After
What a difference a wash makes
Cross Beet Beet De-Stoners are guaranteed to remove 100% of the stones from the beet. These machines will also pre-clean the beet which makes the water last longer. The jet nozzle option allows the user to wash the beet as it exits the machine after the beet has been soaked for a duration in the water bath.
Cross Beet Washers use a range of clever patented technologies to remove any size of stone from beet or any other root crop. From very large stones to small pebbles, it removes everything.
The cyclone system uses a range of rotating fins, varying water height and various pressures of pumped water to create the ideal whirlpool to suck stones down to the waste discharge elevator. The Beet does not pass across the cyclone as it would get sucked in also, instead the beet is directed at speed around the circumference of the de-stoner chamber in a raised body of elevated water. This allows the beet to propel at speed onto the elevator and also increases the output of the machine.
If the stone removal section of the machine was not performing correctly, then the output of the machine would suffer as well as letting stones through.
Variable in size
Cross Beet Washer Choppers all come with a variable chop size option. This allows the operator to select the desired chop size while the machine is in operation with the simple pull of a lever.
The chopper is not only adjustable but can also be folded out of the way when whole beet is required. This can be carried out with out the need for any machine stoppage. A lever will allow the operator to fold the chopper up when the machine is in operation.
Click Image to increase size