DUST SUPPRESSION TANKER RANGE
Recessed = 1,150 to 6,000 Gallons
1,150 - 6,000 Gallons
5,228 - 27,277 Litres
380mm > 900mm
Galvanised or Painted
THE CROSS INDUSTRIAL TANKER RANGE
The Cross industrial tanker range is manufactured in capacities from 1150 gallons (5,228 litres) to 6,000 gallons (27,277 litres) to cover a wide range of industrial needs needs. Uses for these tankers can include, Road Washing, Drain Cleaning Dust Suppression, etc. Industrial tanker can be built to your specifications giving you the benefits of the Cross flexible manufacturing process.
Cross industrial tankers are manufactured using 6mm high quality steel. All tankers are mounted on a strong internal chassis for extra strength. To provide a high level of corrosion resistance all Cross slurry tankers are given two coats of priming paint followed by two finish coats of 2 pack paint giving long lasting durability. Tanker models up to 3,750 Gallons can also be galvanised.
THE CROSS DUST SUPPRESION RANGE
The Cross Road Wash Tanker Range is top of the range when it comes to dust suppression.
There are 3 options when it comes to Dust Suppression:
Spinning Disk - Fits to any Cross Tanker
Rain Gun - For dust suppression that requires distance or on uneven surfaces
Track Width - For suppression dust in a set lane width (Motorway hard shoulder)
All Tankers from Cross can have a spinning disk add on fitted with no modification needed to the tanker.
All tankers can have add ons such as drain cleaning, road wash, split tanker and more.
Lane Width Dust Suppression. Ideal for motorway road works
High Pressure System
The Cross Road Wash Tanker Range is top of the range when it comes to high pressure cleaning. These tankers are fitted with Hi Pressure, stainless steel, CAT pumps. These pumps allow the user work at cleaning pressures of up to 6,000 PSI.
All Road wash tankers can be fitted with numerous wash bar options such as: Behind the tanker, in front of the tanker wheel or on the front lift of the tractor. Some users also fit a sweeper system onto the tanker to add extra cleaning for very heavy mud.
All Road washing applications can be controlled via an in cab electric control panel or a wireless remote control.
Road washing tankers also have the ability to be used as a hand lance power washer. This is easily achieved due to the variable pressure regulator on all tankers. The user can turn down was pressure when using the hand lance.
All Cross Industrial Tankers can be manufactured with a split tanker option.
This feature is ideal to use the tanker as a multi purpose machine. One Tank for clean water for Road Washing, Power Washing, Drain Cleaning. Another tank for suction of dirty water.
This option allows the combined use of a high pressure CAT pump and a Hertel Vacuum pump. The High pressure pump uses the clean water and the vacuum pump can suck clean water or dirty water in to either tank. The Vacuum pump can also suck the used dirty water as the high pressure pump operates the drain cleaning reel.
All Split tankers are build to the specification. Any ratio of split can be accomodated.
Drain Cleaning Reels can also be fitted to any high pressure tanker system.
This reel allows the tanker to clean any size pipe from any blockage or obstruction.
The Drain cleaning nozzle uses a high pressure jet to bore a hole through the blockage and backwards facing jets propel the nozzle forward through the pipe.
A vacuum pump on the tanker can also be used to suck any dirty water that exits the pipe at the same time.
The Cross Range of Industrial Tankers are fitted with various axles from Granning or Distag. Larger Recessed tankers (2500 upwards) and Tandem tankers come standard with a 10 stud Commercial Axle. This axle type has a 420 x 180mm brake shoe. Smaller tankers come standard with a heavy duty 8 stud Agricultural Axle and have the option of a commercial axle upgrade at very little cost. All Axles are fitted with hydraulic brakes as standard. There is also the option of air brakes if needed. Cross Also offer the option of a Stepped Axle upon request. This option is popular for customers on hilly ground. Cross Agricultural Engineering tankers are one of the lowest tankers on the market to begin with before a stepped axle. This is due to the axle being mounted onto the internal chassis on the tanker and not the tanker barrel itself.
Air or Hydraulics or Both
All Cross Tankers come with a few different braking options.
This option is standard across the full range of Cross Tankers.
The option is a great upgrade for a user with a higher speed tractor who does a lot of road transportation and wants smoother and more responsive braking
Air & Hydraulics
This suits the operator with a few different tractors. The tanker can then be used on air with a higher speed tractor and used on hydraulic brakes for an older tractor.
LED Lights Rear & Front LED Side Lights
Hydraulic Vacuum Pump Changeover
15ft Suction hose
Galvanised Back Door, Front trap & Top Trap
Bolt On Mudguards
2 Pack Paint (Galvanise on request)
Sprung Drawbar (Above 2000 Gallon)
4 Fill points (3 blanked off & 1 quick attach)
HD Hitch (40mm)
Heavy Duty Drawbar (150 x 250 x 10mm Box iron)
HD Large Splash Plate
Bolt on Mudguards
6mm steel barrel
The Cross Range of Slurry Tankers are fitted with Hertell Vacuum Pumps.
These pumps have a brilliant repuation for ease of service and durability. The Vacuum pumps are made from ductile steel unlike the competitors cast iron pumps.
Hydraulic Changeover is standard on All Cross Tankers. This comes standard from the Hertell factory as a standard feature. This feature allows for much faster tanker filling as the operators can let the vacuum be building before they leave the tractor cab. It is also much safer as the user does not have to walk near the PTO shaft.
Hydraulic Drive Pumps are also an option from Cross Agricultural Engineering. This allows the user to remove the need for a PTO shaft on the tanker. Combined with Cross' load sensing valve chest this feature can also be fitted on tankers with Trailing shoes and dribble bars.
Electric In cab control panel
Ram Mount suction mount
Built in house (no service wait time)
1 hydraulic hose controls the whole tanker
Can be used for lights, Beacons, spots also
Easy to Use - no touch screen
Night light option
Load Sensing option
Can run hydraulic vacuum pump and trailing shoe/ dribble bar through the one hydraulic system
Same Quality Paint
All Cross Tankers can be painted any colour of your choice
Cross Ensure a high quality finish on their tankers no matter what the colour.
All Cross Machines are Acid treated after manufacturing to strip the metal of any impurities
Machines are then placed in a heated spray booth until the metal is hot
2 Coated of 2 pack primer are then added and left to dry under heat.
After this 2 coats of 2 pack finish coat is applied and is left in the heated spray booth with a raised temperature
The paint is left to oven bake for the best possible finish.
Inside and Outside
The best coating for 100% rust free protection is Hot Dip Galvanising. This process coats the tanker inside and outside with a zinc anti- corrosive coating.
All Galvanised tankers have 100% of the tanker coated. This includes draw bar, front trap, top trap, back door etc.
Some tanker sizes may require dimension changes to accommodate the size of Irish galvanising baths.
Technical Data - Recessed
Click Image to increase size